Mises à jours
Entre le 13 Janvier et le 19 Avril, Datakit a fait évoluer 53 de ses interfaces ou plug-ins.
Vérifiez que vous utilisez bien la version la plus récente et n’hésitez pas à télécharger celle disponible sur le site. Pour rappel, la référence ID de votre PC sera indispensable pour recevoir une version d’évaluation.
Si vous avez un doute sur la validité du contrat de maintenance de votre société, adressez un message à Olivier Rigollet.
Le support technique se tient à votre disposition pour toutes questions.
Liste des mises à jours :
CATIA V5 3D to OPENCASCADE (stand alone)
This
program lets you convert CATIA V5 files (CATPart,CATProduct) into
OPENCASCADE (Brep).
Size : 14 MB | Last update on : Wednesday, April 19, 2006
CATIA V5 3D to RHINO V3 (Plug-in Rhino V3)
Technical Documentation
Import a CatiaV5 file (CatPart , CatProduct) File in Rhino 3 .In the option , you can now import an assembly file as an assembly into Rhino3 .
Size : 3.79 MB | Last update on : Tuesday, April 18, 2006
PRO-ENGINEER 3D to IGES (stand alone)
Converts
Pro/Engineer [Proe 2000i to Wildfire 3] part and assembly ( *.prt
,*.asm ) to IGES (.igs) [ without Pro/E ]
Size : 4.67 MB | Last update on : Friday, April 14, 2006
STEP 3D to IGES (stand alone)
Size : 15.93 MB | Last update on : Friday, April 14, 2006
CATIA V5 3D to ALIBRE (Plug-in Alibre)
CATIA
V5 3D to ALIBRE (Plug-in Alibre) : Import CatiaV5 file (*.CATPart
(part) and *.CATProduct(assembly)) into Alibre. Supports Alibre v8
and v9.
Size : 8.2 MB | Last update on : Thursday, April 13, 2006
SOLIDWORKS 3D to ALIBRE (Plug-in Alibre)
Import
a SolidWorks file (*.slprt,*.sldasm) part and assembly into into
ALibre. Supports Alibre v8 and v9.
Size : 8.2 MB | Last update on : Thursday, April 13, 2006
CATIA V5 3D to IGES (stand alone)
Converts
Catia V5 ( from R5 to R16 ) 3D Parts ( .CATPart ) and Assemblies
(.CATProduct) To Iges files (.igs) [ without Catia V5 ]
Size : 5.62 MB | Last update on : Wednesday, April 12, 2006
SOLIDEDGE 3D to IGES (stand alone)
You
can convert a SolidEdge file (*.par;*.asm) to Iges File without
SolidEdge.
Size : 15.16 MB | Last update on : Wednesday, April 12, 2006
UNIGRAPHICS 3D to IGES (stand alone)
Convert
an Unigraphics file , up to NXV4.0 ,(*.prt) to Iges File , part and
assembly with intern and extern references ;This translator reads the
WIREFRAME entites .
Size : 15.7 MB | Last update on : Wednesday, April 12, 2006
UNIGRAPHICS 3D to STL (stand alone)
Convert
an Unigraphics file, up to NXV4.0 , (*.prt) part and assembly with
intern and extern references to a STL file .
Size : 15.01 MB | Last update on : Wednesday, April 12, 2006
STL TO JT (stand alone)
Allow
you to convert STL files into JT format.
Size : 4.75 MB | Last update on : Tuesday, April 04, 2006
CATIA V4 3D to RHINO V3 (Plug-in Rhino V3)
Import
a CatiaV4 file (Model , Exp,Dlv,Session and Session.Session) File in
Rhino 3
Size : 5.01 MB | Last update on : Tuesday, April 04, 2006
CATIA V5 3D to SOLIDWORKS (Plug-in SolidWorks)
ImportCatia V5 (Brep & Features included in the demo - overcharged by the order )( from R5 to R16 ) 3D Parts ( .CATPart ) and Assemblies (.CATProduct) [ without Catia V5 ] into Solidworks.
Size : 3.14 MB | Last update on : Friday, March 31, 2006
PROENGINEER 3D TO STL (stand alone)
Converts
Pro/Engineer part and assembly to STL
Size : 10.09 MB | Last update on : Thursday, March 30, 2006
PRO-ENGINEER 3D to RHINO V3 (Plug-in Rhino V3)
Converts
Pro/Engineer part and assembly ( *.prt ,*.asm ) To Rhino3
Size : 2.82 MB | Last update on : Thursday, March 30, 2006
JT 3D TO STL (stand alone)
Converts
JT files ( .jt) (V 6.4 & 7.0 ) To Stl files (.stl)
Size : 4.74 MB | Last update on : Thursday, March 30, 2006
JT 3D TO RHINO V3 (¨Plug-in Rhino V3)
Imports
a JT (V 6.4 & 7.0 ) file into Rhino V3
Size : 1.86 MB | Last update on : Wednesday, March 29, 2006
CATIA V4 3D TO STEP (stand alone)
This
translator allows you to convert Catia V4 files (model, .exp, .dlv,
.session) into Step format. CATIA V4 fully spported.
Size : 23.4 MB | Last update on : Tuesday, March 28, 2006
UNIGRAPHICS to MASTERCAM 9.1 (Plug-in Mastercam 9.1)
You can import an Unigraphics3D file (version 15 up to NX4.0) into Mastercam (you don't need Unigraphics) .
Size : 14.41 MB | Last update on : Tuesday, March 21, 2006
UNIGRAPHICS 3D to 3DM (stand alone)
Convert
an Unigraphics file , up to NXV4.0 ,(*.prt) to 3DM(Open Nurbs) File ,
part and assembly with intern and extern references
Size : 16.29 MB | Last update on : Tuesday, March 21, 2006
UNIGRAPHICS 2D to MASTERCAM 9.1 (Plug-in Mastercam 9.1)
You can import an Unigraphics2D file (version 15 up to NX4.0) into Mastercam (you don't need Unigraphics) .
Size : 14.41 MB | Last update on : Tuesday, March 21, 2006
SOLIDWORKS 3D to MASTERCAM V9.1 (Plug-in Mastercam V9.1)
You
can import an SolidWorks file (*.SLDPRT,*.SLDASM) (version 2000 upto
2006) into Mastercam (you don't need SolidWorks) .
Size : 14.41 MB | Last update on : Tuesday, March 21, 2006
SOLIDEDGE 3D to MASTERCAM V9.1 (Plug-in Mastercam V9.1)
You
can import an SolidEdge file (*.par,*.asm) into Mastercam (you don't
need SolidEdge) .
Size : 14.41 MB | Last update on : Tuesday, March 21, 2006
UNIGRAPHICS 2D TO DXF (stand alone)
Convert
an Unigraphics file, up to NXV4.0 , (*.prt) part to a DXF file .
Size : 15.69 MB | Last update on : Tuesday, March 21, 2006
UNIGRAPHICS 2D TO IGES (stand alone)
Convert
an Unigraphics 2D file, up to NXV4.0 , (*.prt) part to a IGES file .
Size
: 15.79 MB |
Last update on : Tuesday, March 21, 2006
DWG, DXF 3D to IGES (stand alone)
Converts DWG, DXF 3D (From AutoDesk) to IGES files (.igs). Converts entities 3DSOLID,BODY,REGION,3DFACE to Iges
Size : 23.6 MB | Last update on : Friday, March 17, 2006
UNIGRAPHICS 3D to PARASOLID (stand alone)
Converts
an Unigraphics File (up to NXV4.0) to only one Parasolid File (Read
Part and Assembly with intern or extern references
Size : 15.26 MB | Last update on : Friday, March 17, 2006
DWG, DXF 3D to ACIS (stand alone)
Converts
DWG,DXF 3D (From AutoDesk) to ACIS files (.sat)
Converts entities
3DSOLID,BODY,REGION,3DFACE to Acis
Size : 23.98 MB | Last update on : Thursday, March 16, 2006
CATIA V4 3D to PARASOLID (stand alone)
Size : 31.85 MB | Last update on : Wednesday, March 15, 2006
DWG,DXF 3D TO STEP (stand alone)
Converts DWG, DXF 3D (From AutoDesk) to STEP files (.stp) . Converts entities 3DSOLID,BODY,REGION,3DFACE to Step
Size : 23.52 MB | Last update on : Wednesday, March 15, 2006
ACIS 3D to CATIA V4 (stand alone)
Size : 21.99 MB | Last update on : Tuesday, March 14, 2006
CATIA V4 3D to ACIS (stand alone)
Size : 21.99 MB | Last update on : Tuesday, March 14, 2006
UNIGRAPHICS 3D to RHINO V3 (Plug-in Rhino V3)
Import
an Unigraphics file, up to NXV4.0 , (*.prt) part and assembly with
intern and extern references to Rhino3 . We read wireframe and solids
entites .You can keep an assembly into Rhino .
Size : 8.38 MB | Last update on : Tuesday, March 14, 2006
PRO-ENGINEER 3D to ACIS (stand alone)
Converts
Pro/Engineer part and assembly ( *.prt ,*.asm ) to Acis (.sat)
Size : 21.67 MB | Last update on : Tuesday, March 14, 2006
UNIGRAPHICS 3D to STEP (stand alone)
Convert
an Unigraphics file, up to NXV4.0 , (*.prt) part and assembly with
intern and extern references to a STEP file .
Size
: 15.35 MB |
Last update on : Tuesday, March 14, 2006
CATIA V4 3D to SOLIDWORKS (Plug-in SolidWorks)
Import CatiaV4 file (*.model,*.dlv,.exp... .session) . Works fully from SolidWorks 2003 to SolidWorks 2006 .
Size
: 3.43 MB |
Last update on : Thursday, March 09, 2006
CATIA V4 2D to DXF (stand alone)
Size : 6.49 MB | Last update on : Thursday, March 02, 2006
CATIAV5 3D to INVENTOR V9 upto V11 (Plug-in Inventor V9 upto V11)
You
can import a CatiaV5 3D file (R7 to R16) into Inventor version 9 upto
11 (you need Inventor 9, 10 or 11).
Size : 111.46 MB | Last update on : Thursday, March 02, 2006
INVENTOR V9 upto V11 3D to CATIA V5 (Plug-in Inventor V9 upto V11)
To
launch the translator, click on the program called
'catiaV5_inventor_CatiaV5.bat' which is located on the desktop. You
can export a Inventor version 9 upto 11 file to CatiaV5 3D (you need
Inventor 9 , 10 or 11).
Size : 111.46 MB | Last update on : Thursday, March 02, 2006
CATIA V4 3D to SOLIDEDGE (Plug-in SolidEdge)
You
can import a CatiaV4 file Model into Solidedge.
Works fully from
SolidEdge V10 to SolidEdge V17
Size : 14.74 MB | Last update on : Wednesday, February 22, 2006
CATIA V5 3D TO SOLIDEDGE (Plug-in SolidEdge)
ImportCatia
V5 ( from R5 to R16) 3D Parts ( .CATPart ) and Assemblies
(.CATProduct) [ without Catia V5 ] into SolidEdge
Works fully from
SolidEdge V10 to SolidEdge V18
Size : 14.15 MB | Last update on : Wednesday, February 22, 2006
CATIA V5 3D to STEP (Stand alone)
Converts
Catia V5 ( from R7 to R16 ) 3D Parts ( .CATPart ) and Assemblies
(.CATProduct) To Step files (.stp) [ without Catia V5 ]
Size : 5.49 MB | Last update on : Tuesday, February 21, 2006
CATIA V4 3D to STL (stand alone)
Size : 9.96 MB | Last update on : Monday, February 20, 2006
CATIA V5 3D to STL (stand alone)
Converts
Catia V5 3D Parts ( .CATPart ) and Assemblies (.CATProduct) (R5 up to
R16 ) To Stl files (.igs) [ without Catia V5 ]
Size : 10.91 MB | Last update on : Monday, February 20, 2006
CATIA V4 3D to IGES (stand alone)
Converts
Catia V4 files (.model, .exp, .dlv, .session, session.session) To
Iges files (.igs).
Size
: 5.4 MB |
Last update on : Friday, February 17, 2006
UNIGRAPHICS 3D to TOPSOLID 6.6 (Plug-in TopSolid 6.6)
Can
load Unigraphics parts into Topsolid. Works fully with Topsolid V6.6
Size : 1.97 MB | Last update on : Friday, February 17, 2006
UNIGRAPHICS 3D TO SOLIDWORKS (plug-in SolidWorks)
Load
an Unigraphics file , up to NXV3.0 ,(*.prt) to SolidWorks , part and
assembly with intern and extern references , we save the assembly
structure .We can write wireframe (see option)
Size : 13.7 MB | Last update on : Wednesday, February 15, 2006
TRANS-XPERT
to
Back up, Analyze, Heal, Export your models
Size : 147.84 MB | Last update on : Wednesday, February 15, 2006
TRANS-XPERT BATCH MANAGER
Batch
Manager
Size : 5.79 MB | Last update on : Wednesday, February 15, 2006
CATIA V5 3D to PARASOLID (stand alone)
Converts
Catia V5 ( from R7 to R16 ) 3D Parts ( .CATPart ) and Assemblies
(.CATProduct) To parasolid files (.x_t) [ without Catia V5 ]
Size : 16.51 MB | Last update on : Thursday, February 09, 2006
CATIA V4 3D to INVENTOR V9 upto V11 (Plug-in Inventor V9 upto V11)
You
can import a CatiaV4 3D file into Inventor version 9 upto 11 (you
need Inventor 9, 10 or 11).
Size : 18.54 MB | Last update on : Wednesday, February 01, 2006
INVENTOR 3D V9 upto V11 to CATIA V4 (Plug–in Inventor V9 upto V11)
You
can export a Inventor version 9 upto V11 file to CatiaV4 3D (you need
Inventor 9 , 10 or 11)
Size : 18.54 MB | Last update on : Wednesday, February 01, 2006
SOLIDWORKS 3D to CATIA V5 3D (Plug-in SolidWorks)
To
launch the translator, click on the program called
'CatiaV5_SW_CatiaV5.bat' which is located on the desktop.
Size : 110.43 MB | Last update on : Friday, January 27, 2006
|
